Category: TIMBER AND INDUSTRIAL TIMBER PRODUCTS

The process of a cutting down or knocking down or causing trees to fall to the ground is called the felling of a tree. Trees have to be felled only when they are very close to maturity or have just matured. Generally, trees attain maturity between 50 and 100 years. Trees cut before maturity may…

A tree grows through the tops of branches. Just within the inner bark, the tree becomes thicker by the formation of cells. A young tree grows taller and thicker every year. The growth is rapid during spring and slower during late summer and early fall. In young trees, hollow cells are alive. During the growing…

A cross-section of an exogenous tree is shown in Fig. 10.1. It shows almost distinct concentric rings called annual rings. Pith is the innermost central portion consisting of cellular tissues. The inner annular area surrounding the pith is called heartwood. Heartwood is the one which is used for all engineering works. The portion between the cambium layer and the heartwood…

Basic Structure of a Tree A tree consists of a trunk, a crown and roots. The functions of the roots are to implant the tree in the soil, absorb moisture and mineral substances it contains and in turn supply them to the trunk. The trunk supports the crown and serves to provide water and nutrients…

Timber is a product of wood from felled trees suitable for construction purposes. Timber is one of the oldest and natural civil engineering construction materials. Three terms pertinent to timber one of interest. They are: Wood, as a building material, has a number of valuable properties, viz., relatively high strength, low bulk density, low heat…