{"id":1929,"date":"2024-07-30T21:11:50","date_gmt":"2024-07-30T21:11:50","guid":{"rendered":"https:\/\/workhouse.sweetdishy.com\/?p=1929"},"modified":"2024-07-30T21:11:51","modified_gmt":"2024-07-30T21:11:51","slug":"spring-controlled-centrifugal-governor","status":"publish","type":"post","link":"https:\/\/workhouse.sweetdishy.com\/index.php\/2024\/07\/30\/spring-controlled-centrifugal-governor\/","title":{"rendered":"\u00a0\u00a0SPRING CONTROLLED CENTRIFUGAL GOVERNOR"},"content":{"rendered":"\n


14.7.1  Hartnell Governor<\/h4>\n\n\n\n

The Hartnell governor is shown in\u00a0Figure 14.7(a).\u00a0The two bell crank levers are used which can rotate about fulcrums\u00a0O<\/em>\u00a0and\u00a0O<\/em>\u2032. One end of both bell crank lever carries a ball and a roller at the other end of the arm. The rollers make contact with the sleeve. A helical spring is mounted on the spindle between frame and sleeve. With the rotation of the spindle, all these parts rotate.<\/p>\n\n\n\n

\"Figure<\/figure>\n\n\n\n

Figure 14.7<\/strong> (a) Hartnell Governor and (b) Force Analysis of Hartnell Governor<\/p>\n\n\n\n

With the increase in speed, the radius of rotation of the balls increases and the rollers lift the sleeve against the spring force. With the decrease in speed, the sleeve moves downwards. The movement of the sleeve is transferred to the throttle of the engine through linkages.<\/p>\n\n\n\n

Let<\/p>\n\n\n\n

r<\/em>1<\/sub><\/td>=<\/td>Minimum radius of rotation of ball centre from spindle axis, in m<\/td><\/tr>
r<\/em>2<\/sub><\/td>=<\/td>Maximum radius of rotation of ball centre from spindle axis, in m<\/td><\/tr>
S<\/em>1<\/sub><\/td>=<\/td>Spring force exerted on sleeve at minimum radius, in N<\/td><\/tr>
S<\/em>2<\/sub><\/td>=<\/td>Spring force exerted on sleeve at maximum radius, in N<\/td><\/tr>
m<\/em><\/td>=<\/td>Mass of each ball, in kg<\/td><\/tr>
M<\/em><\/td>=<\/td>Mass of sleeve, in kg<\/td><\/tr>
N<\/em>1<\/sub><\/td>=<\/td>Minimum speed of governor at minimum radius, in rpm<\/td><\/tr>
N<\/em>2<\/sub><\/td>=<\/td>Maximum speed of governor at maximum radius, in rpm<\/td><\/tr>
\u03c9<\/em>1<\/sub> and \u03c9<\/em>2<\/sub><\/td>=<\/td>Corresponding minimum and maximum angular velocities, in rad\/s<\/td><\/tr>
<\/a>(F<\/em>C<\/sub>)1<\/sub><\/td>=<\/td>Centrifugal force corresponding to minimum speed<\/td><\/tr>
(F<\/em>C<\/sub>)2<\/sub><\/td>=<\/td>Centrifugal force corresponding to maximum speed<\/td><\/tr>
s<\/em><\/td>=<\/td>Stiffness of spring or the force required to compress the spring by 1 m<\/td><\/tr>
r<\/em><\/td>=<\/td>Distance of fulcrum O<\/em> from the governor axis or radius of rotation<\/td><\/tr>
a<\/em><\/td>=<\/td>Length of ball arm of bell crank lever, i.e., distance OA<\/em><\/td><\/tr>
b<\/em><\/td>=<\/td>Length of sleeve arm of bell crank lever, i.e., distance OC<\/em><\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

 <\/p>\n\n\n\n

Considering the position of the ball at radius \u2018r<\/em>2<\/sub>\u2019 as shown in\u00a0Figure 14.7(b)\u00a0and taking the moments of all the forces about\u00a0O<\/em>\u2032.<\/p>\n\n\n\n

\"Equation\"\/<\/figure>\n\n\n\n

<\/a>If \u03b8<\/em>1<\/sub> and \u03b8<\/em>2<\/sub> are small. Weight w<\/em> is small in comparision to W<\/em> and spring force S, w<\/em> tan \u03b8<\/em>1<\/sub> and w<\/em> tan \u03b8<\/em>2<\/sub> can be neglected.<\/p>\n\n\n\n

\"Equation\"\/<\/figure>\n\n\n\n

Example 14.5:<\/strong> A Hartnell governor having a central sleeve spring and two right angled bell crank levers moves between 280 and 320 rpm for a sleeve lift of 15 mm. The sleeve arms and the ball arms are 100 and 120 mm, respectively. The levers are pivoted at 120 mm from the governor axis and mass of each ball is 4 kg. The ball arms are parallel to the governor axis at the lowest equilibrium speed. Determine load on spring at lowest and highest speeds and stiffness of the spring.<\/p>\n\n\n\n

Solution:<\/p>\n\n\n\n

Let<\/p>\n\n\n\n

S<\/em>1<\/sub> = Load on spring at lowest speed<\/p>\n\n\n\n

S<\/em>2<\/sub> = Load on spring at highest speed<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Since the ball arms are parallel to governor axis at the lowest speed, therefore, r<\/em> = r<\/em>1<\/sub> = 120 mm<\/p>\n\n\n\n

\"Equation\"\/<\/figure>\n\n\n\n

Let r<\/em>2<\/sub> is radius of rotation at N<\/em>2<\/sub> = 320 rpm.<\/p>\n\n\n\n

\"equation\"\/<\/figure>\n\n\n\n

<\/a>14.7.2  Willson\u2013Hartnell Governor<\/h4>\n\n\n\n

In this governor, balls are connected by a spring (in two parts) and one more spring is used in sleeve mechanism to adjust the radius of rotation of the balls as shown in Figure 14.8.<\/a><\/p>\n\n\n\n

\"Figure<\/figure>\n\n\n\n

Figure 14.8<\/strong> Willson\u2013Hartnell Governor<\/p>\n\n\n\n

Let<\/p>\n\n\n\n

         P<\/em> = Tension in the main spring A<\/p>\n\n\n\n

         S<\/em> = Tension in spring B<\/p>\n\n\n\n

         w<\/em> = Weight of each ball<\/p>\n\n\n\n

         W<\/em> = Weight of sleeve<\/p>\n\n\n\n

         s<\/em>a<\/sub> = Stiffness of each ball spring A<\/p>\n\n\n\n

         s<\/em>b<\/sub> = Stiffness in auxiliary spring B<\/p>\n\n\n\n

         F<\/em>C<\/sub> = Centrifugal force on each ball<\/p>\n\n\n\n

         r<\/em> = Radius of rotation of balls<\/p>\n\n\n\n

Taking moment about O<\/em> neglecting weight of ball, we get<\/p>\n\n\n\n

\"Equation\"\/<\/figure>\n\n\n\n

Using 1 and 2 suffix for minimum and maximum equilibrium speed<\/p>\n\n\n\n

\"Equation\"\/<\/figure>\n\n\n\n

On subtraction, we get<\/p>\n\n\n\n

\"Equation\"\/<\/figure>\n\n\n\n

When the radius of rotation increases from r<\/em>1<\/sub> to r<\/em>2<\/sub>, the spring A<\/em> extends by 2 (r<\/em>2<\/sub> \u2212 r<\/em>1<\/sub>) and spring B<\/em> extends by (r<\/em>2<\/sub> \u2212 r<\/em>1<\/sub>) \u00d7 \"equation\". <\/p>\n\n\n\n

\"equation\"\/<\/figure>\n\n\n\n

Substituting the value of P<\/em>2<\/sub> \u2212 P<\/em>1<\/sub> and S<\/em>2<\/sub> \u2212 S<\/em>1<\/sub> in Eq. (14.3)<\/a><\/p>\n\n\n\n

\"Equation\"\/<\/figure>\n\n\n\n

<\/a>Example 14.6:<\/strong> A Wilson\u2013Hartnell governor consists of balls of mass of 2 kg each, minimum and maximum radius of rotation 150 and 180 mm, respectively, minimum and maximum speed 220 and 240 rpm, respectively, length of ball arm of each bell crank lever 150 mm, length of the sleeve arm of each bell crank lever 100 mm, and combined stiffness of two ball springs 0.2 kN\/m. Find the equivalent stiffness of the auxiliary spring referred to the sleeve.<\/p>\n\n\n\n

Solution:<\/p>\n\n\n\n

Let S<\/em> be the equivalent stiffness of the auxiliary spring referred to the sleeve, \"equation\"<\/p>\n\n\n\n

We know the centrifugal force at the minimum speed,<\/p>\n\n\n\n

\"Equation\"\/<\/figure>\n\n\n\n

14.7.3  Hartung Governor<\/h4>\n\n\n\n

The Hartung governor is shown in\u00a0Figure 14.9.\u00a0In this governor, the vertical arms of the bell crank levers are fitted with spring balls which compress against the frame of the governor when the rollers at the end of horizontal arms press against the sleeve.<\/p>\n\n\n\n

\"Figure<\/figure>\n\n\n\n

Figure 14.9<\/strong> Hartung Governor<\/p>\n\n\n\n

<\/a>Let<\/p>\n\n\n\n

S<\/em> = Spring force<\/p>\n\n\n\n

F<\/em>C<\/sub> = Centrifugal force<\/p>\n\n\n\n

W<\/em> = Weight of sleeve<\/p>\n\n\n\n

x<\/em> and y<\/em> = Lengths of vertical and horizontal arms of bell crank lever, respectively.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Taking moment about fulcrum O<\/em>, we get<\/p>\n\n\n\n

\"Equation\"\/<\/figure>\n\n\n\n

Example 14.7:<\/strong> In a Hartung type governor ball arm and sleeve arm length are 80 and 100 mm, respectively. The total travel of the sleeve is 15 mm. In the mid position each spring is compressed by 40 mm and radius of rotation of mass centre is 120 mm, each ball has a mass of 4 kg and spring has a stiffness of 10 kN\/m in compression. The equivalent mass at governor sleeve is 15 kg. Neglecting the moment due to revolving masses and when the arms are inclined, determine the speed in the mid position.<\/p>\n\n\n\n

Solution:\u00a0<\/p>\n\n\n\n

\"Equation\"\/<\/figure>\n","protected":false},"excerpt":{"rendered":"

14.7.1  Hartnell Governor The Hartnell governor is shown in\u00a0Figure 14.7(a).\u00a0The two bell crank levers are used which can rotate about fulcrums\u00a0O\u00a0and\u00a0O\u2032. One end of both bell crank lever carries a ball and a roller at the other end of the arm. The rollers make contact with the sleeve. A helical spring is mounted on the spindle […]<\/p>\n","protected":false},"author":1,"featured_media":1930,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[346],"tags":[],"class_list":["post-1929","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flywheel-and-governors"],"jetpack_featured_media_url":"https:\/\/workhouse.sweetdishy.com\/wp-content\/uploads\/2024\/07\/download-9.png","_links":{"self":[{"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/posts\/1929","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/comments?post=1929"}],"version-history":[{"count":1,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/posts\/1929\/revisions"}],"predecessor-version":[{"id":1931,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/posts\/1929\/revisions\/1931"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/media\/1930"}],"wp:attachment":[{"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/media?parent=1929"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/categories?post=1929"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/tags?post=1929"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}