{"id":2537,"date":"2024-08-24T08:29:51","date_gmt":"2024-08-24T08:29:51","guid":{"rendered":"https:\/\/workhouse.sweetdishy.com\/?p=2537"},"modified":"2024-08-24T08:29:51","modified_gmt":"2024-08-24T08:29:51","slug":"d-c-circuits","status":"publish","type":"post","link":"https:\/\/workhouse.sweetdishy.com\/index.php\/2024\/08\/24\/d-c-circuits\/","title":{"rendered":"\u00a0\u00a0D.C. CIRCUITS"},"content":{"rendered":"\n

The closed path in which direct current flows is called d.c. circuit.<\/p>\n\n\n\n

A simple d.c. circuit is shown in\u00a0Figure 1.12\u00a0which contains a d.c. source (battery), a load (lamp), a switch, connecting leads and measuring instruments such as ammeter and voltmeter.<\/p>\n\n\n\n

The simplified line diagram of the same d.c. circuit is shown in\u00a0Figure 1.13. The load resistors are connected in series, parallel, or series\u2013parallel combination as per the requirement.<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Fig. 1.12  <\/strong>Pictorial view of dc circuit<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Fig. 1.13  <\/strong>Line diagram of dc circuit with measuring instruments<\/p>\n\n\n\n

1.31  SERIES CIRCUITS<\/h5>\n\n\n\n

In the circuit, a number of resistors are connected end to end so that same current flows through them is called series circuit.<\/p>\n\n\n\n

Figure 1.14\u00a0shows a simple series circuit. In the circuit, three resistors\u00a0R<\/em>1<\/sub>,\u00a0R<\/em>2<\/sub>, and\u00a0R<\/em>3<\/sub>\u00a0are connected in series across a supply voltage of\u00a0V<\/em>\u00a0volt. The same current (I<\/em>) is flowing through all the three resistors.<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Fig. 1.14  <\/strong>Resistors connected in series<\/p>\n\n\n\n

If V<\/em>1<\/sub>, V<\/em>2<\/sub>, and V<\/em>3<\/sub> are the voltage drops across the three resistors R<\/em>1<\/sub>, R<\/em>2<\/sub>, and R<\/em>3<\/sub>, respectively, then<\/p>\n\n\n\n

 <\/p>\n\n\n\n

V<\/em> = V<\/em>1<\/sub> + V<\/em>2<\/sub> + V<\/em>3<\/sub> = IR<\/em>1<\/sub> + IR<\/em>2<\/sub> + IR<\/em>3<\/sub> (Ohm\u2019s law)<\/p>\n\n\n\n

Let \u2018R\u2019<\/em> be the total resistance of the circuit, then<\/p>\n\n\n\n

 <\/p>\n\n\n\n

IR<\/em> = IR<\/em>1<\/sub> + IR<\/em>2<\/sub> + IR<\/em>3<\/sub> or R<\/em> = R<\/em>1<\/sub> + R<\/em>2<\/sub> + R<\/em>3<\/sub><\/p>\n\n\n\n

that is, Total resistance = Sum of the individual resistances.<\/p>\n\n\n\n

The common application of this circuit is in the marriages for decoration purposes where a number of low-voltage lamps are connected in series. In this circuit, all the lamps are controlled by a single switch, and they cannot be controlled individually. In domestic, commercial, and industrial wiring system, the main switch and fuses are connected in series to provide the necessary control and protection.<\/p>\n\n\n\n

1.32  PARALLEL CIRCUITS<\/h5>\n\n\n\n

In this circuit, one end of all the resistors is joined to a common point and the other ends are also joined to another common point so that different current flows through them is called parallel circuit.<\/p>\n\n\n\n

Figure 1.15<\/a> shows a simple parallel circuit. In this circuit, three resistors R<\/em>1<\/sub>, R<\/em>2<\/sub>, and R<\/em>3<\/sub> are connected in parallel across a supply voltage of V<\/em> volt. The current flowing through them is I<\/em>1<\/sub>, I<\/em>2<\/sub>, and I<\/em>3<\/sub>, respectively.<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Fig. 1.15  <\/strong>Resistors connected in parallel<\/p>\n\n\n\n

<\/a>The total current drawn by the circuit,<\/p>\n\n\n\n

I<\/em> = I<\/em>1<\/sub> + I<\/em>2<\/sub> + I<\/em>3<\/sub> \"img\" (according to Ohm’s law)<\/p>\n\n\n\n

Let \u2018R\u2019<\/em> be the total or effective resistance of the circuit, then<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

that is, Reciprocal of total resistance = sum of reciprocal of the individual resistances.<\/p>\n\n\n\n

All the appliances are operated at the same voltage, and therefore, all of them are connected in parallel. Each one of them can be controlled individually with the help of a separate switch.<\/p>\n\n\n\n

1.33  SERIES\u2013PARALLEL CIRCUITS<\/h5>\n\n\n\n

The circuit in which series and parallel circuits are connected in series is called series\u2013parallel circuit.<\/p>\n\n\n\n

Figure 1.16<\/a> shows a simple series\u2013 parallel circuit. In this circuit, two resistors R<\/em>1<\/sub> and R<\/em>2<\/sub> are connected in parallel with each other across terminals AB. The other three resistors R<\/em>3<\/sub>, R<\/em>4<\/sub>, and R<\/em>5<\/sub> are connected in parallel with each other across terminal BC. The two groups of resistors R<\/em>AB<\/sub> and R<\/em>BC<\/sub> are connected in series with each other across the supply voltage of V<\/em> volt.<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Fig. 1.16  <\/strong>Resistors connected in series-parallel combination<\/p>\n\n\n\n

The total or effective resistance of the whole circuit can be determined as given below:<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Similarly,<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

or<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Total or effective resistance of the circuit, R<\/em> = R<\/em>AB<\/sub> + R<\/em>BC<\/sub><\/p>\n\n\n\n

1.34  DIVISION OF CURRENT IN PARALLEL CIRCUITS<\/h5>\n\n\n\n

In parallel circuits, current is divided depending upon the value of resistors and the number of branches as discussed below.<\/p>\n\n\n\n

1.34.1  When Two Resistors are Connected in Parallel<\/h4>\n\n\n\n

Figure 1.17<\/a> shows two resistors having resistance R<\/em>1<\/sub> and R<\/em>2<\/sub> connected in parallel across supply voltage of V<\/em> volt. Let the current in each branch be I<\/em>1<\/sub> and I<\/em>2<\/sub>, respectively.<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Fig. 1.17  <\/strong>Division of current in two resistors connected in parallel<\/p>\n\n\n\n

<\/a>According to Ohm\u2019s law, I<\/em>1<\/sub>R<\/em>1<\/sub> = I<\/em>2<\/sub>R<\/em>2<\/sub> = V<\/em> or \"img\"<\/p>\n\n\n\n

Hence, the current in each branch of a parallel circuit is inversely proportional to its resistance. The value of branch current can also be expressed in terms of total circuit current, that is,<\/p>\n\n\n\n

 <\/p>\n\n\n\n

I<\/em>1<\/sub>R<\/em>1<\/sub> = I<\/em>2<\/sub>R<\/em>2<\/sub> = IR<\/em> = V<\/em><\/p>\n\n\n\n

where R<\/em> is total or effective resistance of the circuit and I<\/em> is the total current.<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Now,<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Similarly,<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

1.34.2  When Three Resistors are Connected in Parallel<\/h4>\n\n\n\n

Figure 1.18<\/a> shows three resistors having resistance R<\/em>1<\/sub>, R<\/em>2<\/sub>, and R<\/em>3<\/sub> connected in parallel across a supply voltage of V<\/em> volt. Let the current in each branch be I<\/em>1<\/sub>, I<\/em>2<\/sub>, and I<\/em>3<\/sub>, respectively.<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Fig. 1.18  <\/strong>Division of current in three resistors connected in parallel<\/p>\n\n\n\n

According to Ohm\u2019s law,<\/p>\n\n\n\n

 <\/p>\n\n\n\n

I<\/em>1<\/sub>R<\/em>1<\/sub> = I<\/em>2<\/sub>R<\/em>2<\/sub> = I<\/em>3<\/sub>R<\/em>3<\/sub> = IR<\/em> = V<\/em><\/p>\n\n\n\n

Where R<\/em> is the total or effective resistance of the circuit and I<\/em> is the total current.<\/p>\n\n\n\n

Now,<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

\u2234<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

or<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Similarly,<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

and<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

<\/a>Example 1.13<\/strong><\/p>\n\n\n\n

A resistor R<\/em> is connected in series with a parallel circuit comprising of two resistors having resistance of 12 and 8 <\/em>ohm, respectively. The total power dissipated in the circuit is 96 W<\/em> applied voltage is 24 <\/em>V. Calculate the value of R<\/em>.<\/p>\n\n\n\n

Solution:<\/em><\/p>\n\n\n\n

Total power dissipated P<\/em> = 96 W; applied voltage, V<\/em> = 24 V<\/p>\n\n\n\n

The circuit diagram is shown in\u00a0Figure 1.19. Equivalent resistance of the two resistances connected in parallel is say\u00a0RP<\/sub><\/em>.<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Fig. 1.19  <\/strong>Circuit diagram as per data<\/p>\n\n\n\n

\u2234<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

or<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Current supplied to the circuit,<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Effective resistance of the circuit,<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Now,<\/p>\n\n\n\n

 <\/p>\n\n\n\n

R<\/em>EFF<\/sub><\/em> = R<\/em> + R<\/em>P<\/sub><\/em><\/p>\n\n\n\n

\u2234<\/p>\n\n\n\n

 <\/p>\n\n\n\n

R<\/em> = R<\/em>EFF<\/sub><\/em> \u2212 R<\/em>P<\/sub><\/em> = 6 \u2013 4.8 = 1.2 ohm (Ans.)<\/p>\n\n\n\n

Example 1.14<\/strong><\/p>\n\n\n\n

A circuit consists of three resistances of 12 <\/em>ohm, 18 <\/em>ohm, and 3 ohm, respectively, joined in parallel is connected in series with a fourth resistance. The whole circuit is supplied at 60 <\/em>V and it is found that power dissipated in 12 <\/em>ohm resistance is 36 <\/em>W. Determine the value of fourth resistance and the total power dissipated in the group.<\/p>\n\n\n\n

Solution:<\/em><\/p>\n\n\n\n

The circuit diagram is shown in\u00a0Figure 1.20.<\/p>\n\n\n\n

\"img\"\/<\/figure>\n\n\n\n

Fig. 1.20  <\/strong>Circuit diagram as per data<\/p>\n","protected":false},"excerpt":{"rendered":"

The closed path in which direct current flows is called d.c. circuit. A simple d.c. circuit is shown in\u00a0Figure 1.12\u00a0which contains a d.c. source (battery), a load (lamp), a switch, connecting leads and measuring instruments such as ammeter and voltmeter. The simplified line diagram of the same d.c. circuit is shown in\u00a0Figure 1.13. The load […]<\/p>\n","protected":false},"author":1,"featured_media":2504,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[403],"tags":[],"class_list":["post-2537","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-concepts-of-circuit-theory"],"jetpack_featured_media_url":"https:\/\/workhouse.sweetdishy.com\/wp-content\/uploads\/2024\/08\/lightning.png","_links":{"self":[{"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/posts\/2537","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/comments?post=2537"}],"version-history":[{"count":1,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/posts\/2537\/revisions"}],"predecessor-version":[{"id":2538,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/posts\/2537\/revisions\/2538"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/media\/2504"}],"wp:attachment":[{"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/media?parent=2537"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/categories?post=2537"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/workhouse.sweetdishy.com\/index.php\/wp-json\/wp\/v2\/tags?post=2537"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}